I was reading through the Etsy Forums yesterday and saw a shout out to any Floridians in the Street Team Section. As we got to talking, we realized that there are currently street teams for Northern, Central, and Southern FL, but none of them really seem to be active. This led PaperScissorsArt to call for a chat last night to discuss how we would all like to go about organizing a Street Team that covers all of Florida. Check out Paper's Street Team Section post as well as her blog entry for an update on last night's chat and details if you're interested in taking part in the team. There's lots of great stuff planned already!
Personally, I'm very excited about this opportunity. I'm very much interested in being involved with the Etsy community as well as the opportunity to network, support, and get to know other Etsians around me. Plus, I'm in Clearwater, so it works out well!
I'm also a member of the fairly new Etsy Bloggers Street Team and am having a blast with that one, too. Check out the Etsy Bloggers Street Team Blog (of course we have one!) and the Etsy Bloggers Street Team Profile at Etsy if you're interested in joining that group. So far, we've had one group writing project (orange for Etsy) and are starting to do a weekly blog carnival with this week's writing project (subject: your studio/workspace).
Wednesday, July 11, 2007
Friday, July 6, 2007
Will Copper Turn My Skin Green?
Personally, I love copper. I love it when it's bright and shiny and even after it starts to oxidize and get darker. There's a bit more weight to it than bright aluminum or even sterling silver and has such a beautiful warm glow. I love mixing it with other metals for a two tone look. Also, I'm not an expert, but there is a lot of anecdotal evidence to suggest it might help people reduce the pain of arthritis.
I do get a lot of questions and comments from people about whether or not copper will make their skin turn green. Copper oxidizes by darkening and then turning green, just as sterling does so by tarnishing and iron does so by rusting. It's a natural process and the environment determines how quickly it happens. It happens faster in high humidity, but the speed of oxidation is also affected by the body chemistry of different people. Some people wear copper every day and it never turns green, some people wear it and it turns in one day. Some people can turn sterling dark in one day, too. We're all different in that way. I guess I'm lucky, because it actually takes quite some time for copper to even begin to show signs of oxidation for me and it also doesn't turn me green, so I get to enjoy wearing this lovely metal!
If you check out my last post, you'll find a quick, easy way to clean your copper if it does start to oxidize. Enjoy!
I do get a lot of questions and comments from people about whether or not copper will make their skin turn green. Copper oxidizes by darkening and then turning green, just as sterling does so by tarnishing and iron does so by rusting. It's a natural process and the environment determines how quickly it happens. It happens faster in high humidity, but the speed of oxidation is also affected by the body chemistry of different people. Some people wear copper every day and it never turns green, some people wear it and it turns in one day. Some people can turn sterling dark in one day, too. We're all different in that way. I guess I'm lucky, because it actually takes quite some time for copper to even begin to show signs of oxidation for me and it also doesn't turn me green, so I get to enjoy wearing this lovely metal!
If you check out my last post, you'll find a quick, easy way to clean your copper if it does start to oxidize. Enjoy!
Labels:
armor,
armour,
athenasarmoury,
bracelet,
copper,
etsy,
jewelry,
maille,
metal,
shop,
tutorial
Tuesday, July 3, 2007
Etsy Bloggers Street Team Theme: Orange
I've been racking my brain trying to think of a fantastic project I can do using orange jump rings or O-rings, but not having any in stock at the moment put a serious damper on that! But then, I realized that I already have some orange already in both of my shops! I've got some orange pendants in my original Etsy shop, Beach Bum Creations.
But, even more exciting than supplies is something that I've made. Although, not really orange, copper's as close as I've got! You can find this Mobiused Rosette Bracelet in Athena's Armoury, my new shop for chain maille.
That's probably one of my all time favorite bracelets. I made one for myself and always get compliments on it. It was made using 18 gauge copper rings with, I believe, 1/4" inner diameter. It's a variation on the classic Euro 4-1 chain maille weave (most commonly seen in armour).
Cleaning Copper
I've had mine for quite some time now and it's starting to get a little dull, but that's easily fixed. Just mix together some lemon juice and salt, add bracelet, then slosh around a little bit. However, you must make sure you rinse it off!! The salt will make the bracelet crusty if you let it sit and the acid in the lemon juice will eat away at the metal. If you want to make extra certain it's clean of the lemon juice solution and perhaps keep the shine a bit longer, you can make a paste with baking powder and water and rub it on the copper. This will neutralize the acid. Then, of course, rinse again and dry. Beautiful, shiny copper once again!
But, even more exciting than supplies is something that I've made. Although, not really orange, copper's as close as I've got! You can find this Mobiused Rosette Bracelet in Athena's Armoury, my new shop for chain maille.
That's probably one of my all time favorite bracelets. I made one for myself and always get compliments on it. It was made using 18 gauge copper rings with, I believe, 1/4" inner diameter. It's a variation on the classic Euro 4-1 chain maille weave (most commonly seen in armour).
Cleaning Copper
I've had mine for quite some time now and it's starting to get a little dull, but that's easily fixed. Just mix together some lemon juice and salt, add bracelet, then slosh around a little bit. However, you must make sure you rinse it off!! The salt will make the bracelet crusty if you let it sit and the acid in the lemon juice will eat away at the metal. If you want to make extra certain it's clean of the lemon juice solution and perhaps keep the shine a bit longer, you can make a paste with baking powder and water and rub it on the copper. This will neutralize the acid. Then, of course, rinse again and dry. Beautiful, shiny copper once again!
Metalsmithing Class #4: So Close to Being Done!
OK, so lots of people, not enough tools, and a few snafus later and I'm not quite done with my ring yet. I really thought that myself and two or three other people were going to be able to finish them off last week, but it just didn't happen. Oh, well!
I finished getting the back of the ring face (which, coincidentally looks more like a watch face with that big ole spitball that I had to add) nice and shiny since this was the last opportunity I'd have to get at it without anything else in the way. Then, I took the band that I made in our very first class and sawed it open at the solder joint. Thank you to everyone who warned me to wear my safety glasses while sawing. A couple of people in class got a little giggle out of me, but I'd rather that than lose an eye! I did break the blade, by the way. It didn't snap back and get me, though! Oh, and I did saw into my thumb, just a little bit, too (it didn't even bleed). Weeeeeeeeeeeee!
It was after this part that I got into a little bit of trouble (well, more trouble). I was supposed to saw about a half an inch long up the center of either side so that it was a pretty V shape where it attached to the ring face. Well, for some reason when I sawed, I veered to the right and thus made one side of my V quite a bit skinnier on one side than the other. I saw that it didn't look good, but didn't truly realize my mistake until a couple of steps later.
I wrapped the wire around a ring mandrel and shaped it to my size, taking into account that the ring face would actually be a portion of it. Well, when I went to file down the ends to get a nice flush surface in order to solder it, is when I really realized the sawing mess I made. Once I started to file, one side of the V bent back. Oops. Susan said, "No problem. You'll just attach it with a V shape on one side and the other side will be soldered in the space in between." Cool, again, I'll be making a mistake into something unique and neat looking. So, I went back to filing and trying to get my nice flush surface. The same thing happens with the V on the other side of the band. Ggggrrrrrrrrrrr. I show Susan. "Well, it will work, it just won't look as cool." Insert sad face. Here it is after the soldering:
I needed to use a third hand in order keep the band from falling over: after I got through filing it, it was just a little too thin to stay upright on it's own.
Next step will be polishing and making it shine like a mirror. Then, I'll get down to business getting that shell in place. With any luck, I'll be able to finish it this week, but who knows what will happen next! Plus, this week's class is on the 4th of July, so we'll probably be a little bit more raucous than usual. Someone mentioned bringing in sparklers. I wonder if I should bring in a lighter so we don't have to use the torch to light them. . . =)

It was after this part that I got into a little bit of trouble (well, more trouble). I was supposed to saw about a half an inch long up the center of either side so that it was a pretty V shape where it attached to the ring face. Well, for some reason when I sawed, I veered to the right and thus made one side of my V quite a bit skinnier on one side than the other. I saw that it didn't look good, but didn't truly realize my mistake until a couple of steps later.
I wrapped the wire around a ring mandrel and shaped it to my size, taking into account that the ring face would actually be a portion of it. Well, when I went to file down the ends to get a nice flush surface in order to solder it, is when I really realized the sawing mess I made. Once I started to file, one side of the V bent back. Oops. Susan said, "No problem. You'll just attach it with a V shape on one side and the other side will be soldered in the space in between." Cool, again, I'll be making a mistake into something unique and neat looking. So, I went back to filing and trying to get my nice flush surface. The same thing happens with the V on the other side of the band. Ggggrrrrrrrrrrr. I show Susan. "Well, it will work, it just won't look as cool." Insert sad face. Here it is after the soldering:
I needed to use a third hand in order keep the band from falling over: after I got through filing it, it was just a little too thin to stay upright on it's own.
Next step will be polishing and making it shine like a mirror. Then, I'll get down to business getting that shell in place. With any luck, I'll be able to finish it this week, but who knows what will happen next! Plus, this week's class is on the 4th of July, so we'll probably be a little bit more raucous than usual. Someone mentioned bringing in sparklers. I wonder if I should bring in a lighter so we don't have to use the torch to light them. . . =)
Subscribe to:
Posts (Atom)